Cutting Parameters of Different Laser Power |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (mm) | IPG700 (100*125) |
Raycus750 (100*125) |
IPG1000 (100*125) |
Raycus1000 (100*125) |
IPG1500 (100*125) |
Raysuc1500 (100*125) |
IPG2000 (100*125) |
Raycus2200 (100*125) |
IPG3000 (100*150) |
Raycus3300 (100*150) |
IPG3000 (100*200) |
Raycus3300 (100*200) |
Raycus6000 (WSX NC60) |
|
| (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | (m/min) | ||
| Caborn Steel O2 | 1 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 | 10-16 |
| 2 | 3.0-4.5 | 3.0-4.0 | 5.0-6.0 | 5.0-6.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | 5.0-8.0 | |
| 3 | 2.0-3.0 | 2.0-2.5 | 2.5-4.0 | 2.5-3.5 | 4.0-5.0 | 3.5-4.5 | 3.5-4.0 | 3.5-4.0 | 3.5-5.0 | 4.0-4.5 | 3.5-5.0 | 4.0-4.5 | 3.0-5.0 | |
| 5 | 1.0-1.5 | 1.0-1.5 | 1.5-1.8 | 1.2-1.8 | 1.5-2.0 | 1.5-1.8 | 2.5-3.0 | 2.0-3.0 | 2.5-3.6 | 3.0-3.5 | 2.5-3.6 | 3.0-3.5 | 3.0-4.0 | |
| 6 | 0.5-1.0 | 0.5-1.0 | 1.2-1.6 | 1.0-1.5 | 1.5-1.8 | 1.3-1.5 | 1.8-2.5 | 1.8-2.2 | 2.4-3.0 | 1.8-2.2 | 2.4-3.0 | 1.8-2.2 | 2.5-3.5 | |
| 8 | 0.5-0.8 | 0.5-0.8 | 0.8-1.0 | 0.8-1.0 | 1.0-1.5 | 1.0-1.2 | 1.3-1.5 | 1.2-1.8 | 1.8-2.4 | 1.8-2.2 | 1.8-2.4 | 1.8-2.2 | 2.0-2.8 | |
| 10 | 0.5-0.7 | 0.5-0.7 | 1.0-1.3 | 0.7-1.0 | 1.2-1.5 | 1.2-1.5 | 1.2-1.8 | 1.1-1.3 | 1.2-1.8 | 1.1-1.3 | 1.0-2.1 | |||
| 12 | 0.4-0.6 | 0.4-0.6 | 0.8-1.0 | 0.6-0.8 | 1.0-1.5 | 0.7-1.0 | 1.0-1.5 | 0.8-1.0 | 1.0-1.5 | 0.8-1.0 | 1.0-2.0 | |||
| 14 | 0.6-0.8 | 0.5-0.7 | 0.6-1.0 | 0.6-0.9 | 0.6-1.0 | 0.6-0.8 | 0.6-1.0 | 0.6-0.8 | 0.8-1.0 | |||||
| 16 | 0.5-0.7 | 0.5-0.7 | 0.6-0.8 | 0.5-0.8 | 0.7-0.85 | 0.5-0.8 | 0.7-0.85 | 0.5-0.8 | 0.7-0.9 | |||||
| 18 | 0.4-0.7 | 0.4-0.6 | 0.6-0.75 | 0.5-0.7 | 0.6-0.75 | 0.5-0.7 | 0.7-0.8 | |||||||
| 20 | 0.5-0.65 | 0.4-0.6 | 0.5-0.65 | 0.4-0.6 | 0.6-0.8 | |||||||||
| 22 | 0.3-0.5 | 0.3-0.5 | 0.3-0.5 | 0.3-0.5 | 0.5-0.7 | |||||||||
| 25 | 0.4-0.6 | |||||||||||||
| Stainless Steel N2 | 1 | 16-22 | 16-20 | 25-28 | 20-24 | 40-45 | 25-30 | 25-30 | 25-30 | 35-50 | 35-45 | 12-20 | 12-20 | 50-70 |
| 2 | 2.5-5.0 | 2.5-4.5 | 7.0-8.0 | 6.0-7.0 | 16-18 | 9.0-10 | 10-14 | 10-11 | 14-18 | 12-14 | 9.0-12 | 8.0-12 | 30-40 | |
| 3 | 1.5-2.0 | 1.5-2.0 | 2.0-3.0 | 2.0-3.0 | 3.0-4.5 | 4.0-5.0 | 5.0-6.5 | 5.0-6.0 | 7.0-10 | 8.0-9.0 | 7.0-10 | 8.0-9.0 | 14-20 | |
| 4 | 0.8-1.2 | 0.8-1.2 | 1.0-1.5 | 1.0-1.5 | 2.0-2.8 | 2.0-3.0 | 3.0-4.0 | 3.0-4.0 | 4.0-6.0 | 4.0-5.0 | 4.0-6.0 | 4.0-5.0 | 6.0-12 | |
| 5 | 0.5-0.8 | 0.5-0.8 | 1.3-1.8 | 1.0-1.5 | 1.5-2.5 | 1.5-2.0 | 2.5-4.0 | 2.5-3.3 | 2.5-4.0 | 2.5-3.3 | 5.0-10 | |||
| 6 | 0.6-0.8 | 0.7-1.0 | 1.2-1.5 | 1.2-1.5 | 1.8-2.5 | 1.6-2.1 | 1.8-2.5 | 1.6-2.1 | 4.0-7.0 | |||||
| 8 | 0.6-0.8 | 0.6-0.8 | 1.2-1.8 | 0.9-1.2 | 1.2-1.8 | 0.9-1.2 | 3.0-5.0 | |||||||
| 10 | 0.7-0.9 | 0.6-0.8 | 0.7-0.9 | 0.6-0.8 | 1.5-2.5 | |||||||||
| 12 | 1.0-2.0 | |||||||||||||
| 14 | 0.8-1.0 | |||||||||||||
| 16 | 0.5-0.8 | |||||||||||||
| Remarks: Text in Blue means cutting simple shapes and small amount production. Text in Red means the maximum cutting thickness, only for sampling, not for production. Text in Pink means can use Nitrogen as assisting gas to increase cutting speed |
||||||||||||||